关于9月13日Supervisor升级2024.09.1后无法启动的解决方法

陈小千

冬瓜HA 发表于 2025-1-29 00:03
有些机型特殊，联系我。我来看看

使用了 wget -O - http://ota.wghaos.com/upos | bash -
显示
Connecting to fw.wghaos.com (118.187.65.86:80)
saving to '/mnt/data/haos_x86-64-vm_cn-14.1.1.raucb'
haos_x86-64-vm_cn-14 100% |************************************************************************************************************************************************************************************************************************************************************************************************************************|  370M  0:00:00 ETA
'/mnt/data/haos_x86-64-vm_cn-14.1.1.raucb' saved
installing
  0% Installing
  0% Determining slot states
10% Determining slot states done.
10% Checking bundle
10% Verifying signature
20% Verifying signature done.
20% Checking bundle done.
20% Checking manifest contents
30% Checking manifest contents done.
30% Determining target install group
40% Determining target install group done.
40% Updating slots
40% Checking slot boot.0
42% Checking slot boot.0 done.
42% Copying image to boot.0
60% Copying image to boot.0 done.
60% Checking slot kernel.1
62% Checking slot kernel.1 done.
62% Copying image to kernel.1
63% Copying image to kernel.1
64% Copying image to kernel.1
65% Copying image to kernel.1
66% Copying image to kernel.1
67% Copying image to kernel.1
68% Copying image to kernel.1
69% Copying image to kernel.1
70% Copying image to kernel.1
71% Copying image to kernel.1
72% Copying image to kernel.1
73% Copying image to kernel.1
74% Copying image to kernel.1
75% Copying image to kernel.1
76% Copying image to kernel.1
77% Copying image to kernel.1
78% Copying image to kernel.1
79% Copying image to kernel.1
80% Copying image to kernel.1 done.
80% Checking slot rootfs.1
82% Checking slot rootfs.1 done.
82% Copying image to rootfs.1
83% Copying image to rootfs.1
84% Copying image to rootfs.1
85% Copying image to rootfs.1
86% Copying image to rootfs.1
87% Copying image to rootfs.1
88% Copying image to rootfs.1
89% Copying image to rootfs.1
90% Copying image to rootfs.1
91% Copying image to rootfs.1
92% Copying image to rootfs.1
93% Copying image to rootfs.1
94% Copying image to rootfs.1
95% Copying image to rootfs.1
96% Copying image to rootfs.1
97% Copying image to rootfs.1
98% Copying image to rootfs.1
99% Copying image to rootfs.1
99% Copying image to rootfs.1 done.
99% Updating slots done.
100% Installing done.
idle
Installing `/mnt/data/haos_x86-64-vm_cn-14.1.1.raucb` succeeded
install completed, please reboot: ha host reboot.
root@homeassistant:/ # ha host reboot

Command completed successfully.

但是SLOTB 还是不行，进SLOT A回到原点。
  OS Version:               Home Assistant OS 13.1
  Home Assistant Core:      2024.9.1

冬瓜HA

陈小千 发表于 2025-1-31 00:10
使用了 wget -O - http://ota.wghaos.com/upos | bash -
显示
Connecting to fw.wghaos.com (118.187.65. ...

联系我吧，不知道你这边出了什么问题

zongyuxian

[ OPTIONS ] Please Input ID (1/2): 1

[ INFO ] Input Type ID: [ 1 ]

[ INFO ] Type of filesystem: [ ext4 ]

[ STEPS ] Partitioning eMMC...

[ INFO ] Start backing up the default bootloader.

4+0 records in

4+0 records out

4194304 bytes (4.2 MB, 4.0 MiB) copied, 1.11214 s, 3.8 MB/s

[ INFO ] Start create MBR and partittion.

Error: Input/output error during write on /dev/mmcblk2

Error: Input/output error during write on /dev/mmcblk2

Error: Input/output error during write on /dev/mmcblk2

[ ERROR ] Failed to partition internal eMMC using [ parted ].大佬，为什么会出现报错呢？他们说是emmc损坏了，但是刷安卓系统没事，就是无法将armbian写入到emmc?希望大佬可以给出解决方案谢谢您！

陈小千

冬瓜HA 发表于 2025-1-31 17:28
联系我吧，不知道你这边出了什么问题

感谢瓜哥！！！大过年的帮我排查了半天。
我重新搞了一下这个NAS的虚拟机，把虚拟硬盘SATA+Virtio SCSI改成了Virtio SCSI+Virtio SCSI,原SATA盘删除，输入wget -O - http://ota.wghaos.com/upos | bash -后OS成功升级成了14.1.1,所以基本可以确定是虚拟硬盘的问题。
core update --version 2025.1.1之后成功把core也更新了，剩下这个Supervisor不知道需不需要更新，想知道有没有必要，然后更新的代码是？[color=var(--primary-text-color)]Core[color=var(--secondary-text-color)]2025.1.1
[color=var(--primary-text-color)]Supervisor[color=var(--secondary-text-color)]2024.08.0
[color=var(--primary-text-color)]Operating System[color=var(--secondary-text-color)]14.1.1
[color=var(--primary-text-color)]Frontend[color=var(--secondary-text-color)]20250106.0

冬瓜HA

陈小千 发表于 2025-2-2 01:18
感谢瓜哥！！！大过年的帮我排查了半天。
我重新搞了一下这个NAS的虚拟机，把虚拟硬盘SATA+Virtio SCSI改 ...

supervisor是强制更新的。不用理会

1131

大佬，已经登入不进去，页面也打开，设备也离线了怎么处理

冬瓜HA

1131 发表于 2025-9-21 09:24
大佬，已经登入不进去，页面也打开，设备也离线了怎么处理

不确定你的问题，看到晚了，你可以私信我。