9月版本，mqtt有大改动了？求大佬解答

MX10085

所有MQTT信息都改了一下，发现改完之后新的mqtt实体名字后面自动加"_2"了，删除旧实体后把新mqtt实体名去掉后面的"_2"就好。

skypjsfly

lanzhudao 发表于 2022-9-9 19:07
这是我根据官网改的，运行没问题。
mqtt:
  sensor:

感谢大佬，我按照这个改好了

alanshu

把zM1的配置文件按新要求，改了一遍，还比较清楚。9月只是预警，12月才真正实施。

yylwhy

mqtt:
  switch:
    - name: "dc1_fish_2"
      state_topic: "dc1/dc1_fish/stat/power2"
      command_topic: "dc1/dc1_fish/cmnd/power2"
      payload_on: "on"
      payload_off: "off"
      availability_topic: "dc1/dc1_fish/tele/availability"
      payload_available: "online"
      payload_not_available: "offline"

    - name: "dc1_fish_3"
      state_topic: "dc1/dc1_fish/stat/power3"
      command_topic: "dc1/dc1_fish/cmnd/power3"
      payload_on: "on"
      payload_off: "off"
      availability_topic: "dc1/dc1_fish/tele/availability"
      payload_available: "online"
      payload_not_available: "offline"

    - name: "dc1_fish_4"
      state_topic: "dc1/dc1_fish/stat/power4"
      command_topic: "dc1/dc1_fish/cmnd/power4"
      payload_on: "on"
      payload_off: "off"
      availability_topic: "dc1/dc1_fish/tele/availability"
      payload_available: "online"
      payload_not_available: "offline"

  sensor:
    - name: "dc1_fish_power"
      state_topic: "dc1/dc1_fish/tele/energy"
      value_template: "{{value_json.power}}"
      unit_of_measurement: "W"

    - name: "dc1_fish_total"
      state_topic: "dc1/dc1_fish/tele/energy"
      value_template: "{{value_json.total}}"
      unit_of_measurement: "kWh"
      device_class: energy
      state_class: measurement    
      #last_reset_topic: "dc1/dc1_fish/tele/energy"
      #last_reset_value_template: "{{value_json.starttime}}" 

homeassistant:
  customize:
    sensor.dc1_fish_power:
      friendly_name: fish实时功率
    sensor.dc1_fish_total:
      friendly_name: fish总用电量

复制代码

b帮忙看看 我还是没搞定啊

活着就要折腾

yylwhy 发表于 2022-9-12 21:34
b帮忙看看 我还是没搞定啊

兄弟，你的搞定没？
我的dc和m1也是这样改的，然后也不行。
如果你搞好了，说一下怎么改的。

~~~我的搞定了，原因是多写了2个mqtt.

yylwhy

活着就要折腾 发表于 2022-9-16 15:24
兄弟，你的搞定没？
我的dc和m1也是这样改的，然后也不行。
如果你搞好了，说一下怎么改的。

我重装了,好了