峥果浴霸,多个接入

jyz_0501

有全关的那个entity吗？ 另外我把两个风暖用滑块整合了，这样方便一点。

- id: '1610355582502'
  alias: 按钮动作：浴霸滑块
  description: ''
  trigger:
  - platform: state
    entity_id: input_number.yu_ba_nuan_feng_deng_ji
  condition: []
  action:
  - choose:
    - conditions:
      - condition: state
        entity_id: input_number.yu_ba_nuan_feng_deng_ji
        state: '1.0'
      sequence:
      - service: switch.turn_on
        data: {}
        entity_id: switch.warmingswitch1
      - service: switch.turn_off
        data: {}
        entity_id: switch.warmingswitch2
    - conditions:
      - condition: state
        entity_id: input_number.yu_ba_nuan_feng_deng_ji
        state: '2.0'
      sequence:
      - service: switch.turn_on
        data: {}
        entity_id: switch.warmingswitch1
      - service: switch.turn_on
        data: {}
        entity_id: switch.warmingswitch2
    - conditions:
      - condition: state
        entity_id: input_number.yu_ba_nuan_feng_deng_ji
        state: '0.0'
      sequence:
      - service: switch.turn_off
        data: {}
        entity_id: switch.warmingswitch1
      - service: switch.turn_off
        data: {}
        entity_id: switch.warmingswitch2
    default: []
  mode: single

复制代码

input_number.yu_ba_nuan_feng_deng_ji 这个直接UI辅助元素那添加一个 替换entity_id即可。

PhoenixZ

我先来试试云端控制

PhoenixZ

云端控制是不行的哦

xzchen

貌似地址变了。新版在HomeKit里面变成空调，也没法控制了。只能刷固件了么

xiaoxihu

附件下载后放在customcomponents 文件夹后，在configuration.yaml内写入后配置检查提升Integration error: zinguo - Integration 'zinguo' not found.麻烦问下什么问题呢。

GFLhassbian

我试过了，没办法用，不知道是什么问题，估计是HA的版本太高了我用的是这个版本的HA 麻烦问一下有解决办法吗
期待更新
Core
2024.1.3
Frontend
20240104.0


Invalid config
The following integrations and platforms could not be set up:

zinguo (Show logs)

Please check your config and logs.