- 积分
- 167
- 金钱
- 123
- 威望
- 0
- 贡献
- 0
- HASS币
- 0
注册会员
- 积分
- 167
- 金钱
- 123
- HASS币
- 0
|
发表于 2018-1-2 18:50:06
|
显示全部楼层
请教楼主大人!按照你的指示我把库文件有安装的!验证一直报错。。。能指导下吗?
Arduino:1.6.12 (Windows 8.1), 开发板:"Generic ESP8266 Module, 80 MHz, 40MHz, DIO, 115200, 2M (1M SPIFFS), ck, Disabled, None"
In file included from C:\Users\瀹嬫稕\Documents\Arduino\libraries\LED\LED.ino:16:0:
C:\Users\宋涛\Documents\Arduino\libraries\FastLED-master/FastLED.h:17:21: note: #pragma message: FastLED version 3.001.005
# pragma message "FastLED version 3.001.005"
^
In file included from C:\Users\宋涛\Documents\Arduino\libraries\FastLED-master/FastLED.h:65:0,
from C:\Users\瀹嬫稕\Documents\Arduino\libraries\LED\LED.ino:16:
C:\Users\宋涛\Documents\Arduino\libraries\FastLED-master/fastspi.h:110:23: note: #pragma message: No hardware SPI pins defined. All SPI access will default to bitbanged output
# pragma message "No hardware SPI pins defined. All SPI access will default to bitbanged output"
^
C:\Users\瀹嬫稕\Documents\Arduino\libraries\LED\LED.ino: In function 'void setup()':
LED:144: error: 'setupStripedPalette' was not declared in this scope
LED:151: error: 'setup_wifi' was not declared in this scope
LED:154: error: 'callback' was not declared in this scope
C:\Users\瀹嬫稕\Documents\Arduino\libraries\LED\LED.ino: In function 'void loop()':
LED:270: error: 'reconnect' was not declared in this scope
LED:319: error: 'addGlitter' was not declared in this scope
LED:325: error: 'addGlitterColor' was not declared in this scope
LED:456: error: 'fadeall' was not declared in this scope
LED:467: error: 'fadeall' was not declared in this scope
LED:474: error: 'Fire2012WithPalette' was not declared in this scope
"ubSubClient.h" 对应多个库
已使用: C:\Users\宋涛\Documents\Arduino\libraries\PubSubClient
未使用:C:\Users\宋涛\Documents\Arduino\libraries\pubsubclient-master
exit status 1
'setupStripedPalette' was not declared in this scope
在文件 -> 首选项开启
“编译过程中显示详细输出”选项
这份报告会包含更多信息。
|
|