欧瑞博精灵外挂espc3接入hass

自在

参考以下帖子欧瑞博精灵接入hass，PCB原理图参考了罗总、宝子、Kevin
https://bbs.hassbian.com/thread-18356-1-1.html






欧瑞博精灵外挂espc3_5bb8da5f2f1e414da467c1395c35a92c.zip (76.41 KB, 下载次数: 1)

2024-5-19 14:33 上传

点击文件名下载附件

substitutions:
  device_name: orvibo-mixpad-df5ec0

esphome:
  name: ${device_name}

esp32:
  board: esp32-c3-devkitm-1
  framework:
    type: arduino

wifi: {ssid: "iot",password: "66666666"}
api: {reboot_timeout: 0s}
web_server: {port: 80}
ota: {safe_mode: true}
logger:






binary_sensor:
  - platform: gpio
    id: i1
    pin: {number: "GPIO5", mode: INPUT_PULLUP, inverted: true}
  - platform: gpio
    id: i2
    pin: {number: "GPIO6", mode: INPUT_PULLUP, inverted: true}

  - platform: gpio
    id: button1
    pin: {number: "GPIO10", mode: INPUT_PULLUP, inverted: true}
    filters:
      - delayed_on: 10ms
    on_release: 
      if:
        condition:
          or:
            - binary_sensor.is_on: i1
            - binary_sensor.is_on: i2
        then:
          - switch.turn_off: trelay1
          - switch.turn_off: trelay2
        else:
          - switch.turn_on: trelay1

switch:
  - platform: gpio
    pin: 3
    id: relay1
    internal: true
    on_turn_on:
    - delay: 300ms
    - switch.turn_off: relay1
  - platform: gpio
    pin: 1
    id: relay2
    internal: true
    on_turn_on:
    - delay: 300ms
    - switch.turn_off: relay2

  - platform: template
    name: "lamp 1"
    id: trelay1
    lambda: |-
      if (id(i1).state) {
        return true;
      } else {
        return false;
      }
    turn_on_action:
      if:
        condition:
          binary_sensor.is_off: i1
        then:
          switch.turn_on: relay1
    turn_off_action:
      if:
        condition:
          binary_sensor.is_on: i1
        then:
          switch.turn_on: relay1
  - platform: template
    name: "lamp 2"
    id: trelay2
    lambda: |-
      if (id(i2).state) {
        return true;
      } else {
        return false;
      }
    turn_on_action:
      if:
        condition:
          binary_sensor.is_off: i2
        then:
          switch.turn_on: relay2
    turn_off_action:
      if:
        condition:
          binary_sensor.is_on: i2
        then:
          switch.turn_on: relay2

复制代码

diy97

家里用的欧瑞博，说实话挺操蛋的，只要是wifi类的都没法接入ha或者homekit ，目前WiFi 窗帘及精灵开关没接入