求救 sonoff m5 switch 刷Esphome失敗

vipvipwgs

一直失敗，求高手
代碼
Using 'COM10' as serial port.
Connecting.....
Detecting chip type... Unsupported detection protocol, switching and trying again...
Connecting...
Detecting chip type... ESP32
Connecting...

Chip Info:
- Chip Family: ESP32
- Chip Model: unknown ESP32 (revision 3)
- Number of Cores: 2
- Max CPU Frequency: 240MHz
- Has Bluetooth: YES
- Has Embedded Flash: NO
- Has Factory-Calibrated ADC: YES
- MAC Address: 54:43:B2:70:2E:5C
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 460800
Changed.
- Flash Size: 4MB
- Flash Mode: dio
- Flash Frequency: 40MHz
Erasing flash (this may take a while)...
Unexpected error: Error while erasing flash: Packet content transfer stopped (received 42887 bytes)


刷了好幾天了求救

bugensui

我也买了。还没有用，不知道怎么刷

dscao

搜索了一下：

https://everythingsmarthome.co.u ... an-m5-with-esphome/
https://community.home-assistant ... th-esphome/379896/9

看这两个应该就会了。

Installing the initial firmware
Plug in the USB cable to your USB adapter, whilst holding pressure down on the pins to make sure they make good contact. If you have a 1 or a 3 button switch, make sure you are pressing and holding the middle button in order to enter flashing mode before you plug in the USB cable to your computer. Wait 3-4 seconds and then you can release the button if you are pressing it, but make sure to keep constant pressure on the pins – it may be easier to have someone help you do this.

vipvipwgs

dscao 发表于 2023-4-8 20:38
搜索了一下：

https://everythingsmarthome.co.uk/flashing-sonoff-switchman-m5-with-esphome/

卡在刷寫時刪除程序，就不動了，我也有照LB把GPIO0短接在GND上，但還是寫入不了，網上資訊不多不知道有沒有大神可以教一下

gmshiwoge

vipvipwgs 发表于 2023-4-10 11:15
卡在刷寫時刪除程序，就不動了，我也有照LB把GPIO0短接在GND上，但還是寫入不了，網上資訊不多不知道有沒 ...

我前几天刷14个面板没你这个问题

vipvipwgs

gmshiwoge 发表于 2023-4-10 12:03
我前几天刷14个面板没你这个问题

大神可以給個視屏教學嗎，拜託

gmshiwoge

vipvipwgs 发表于 2023-4-10 16:05
大神可以給個視屏教學嗎，拜託

你刷我的试试吧

sorrypqa

好像Sonoff的T1、T2、T3系列也不错呀

vipvipwgs

以解決，最後是CH340刷不了，改用CP2104就好了，感謝大家提供解決方法...感謝大大