homeassistant接入MQTT多个传感器

fanx88

升级完新版的HomeAssistant后，发现原来正常的MQTT传感器都没有了，检测不到

mqtt:
  sensor:
    name: "zm1_b0f8931db1f2_temperature"
    unique_id: zm1_b0f8931db1f2_temperature
    # friendly_name: 书房温度
    state_topic: "device/zm1/b0f8931db1f2/sensor"
    unit_of_measurement: "°C"
    icon: "mdi:thermometer"
    value_template: "{{ value_json.temperature }}"

    name: "zm1_b0f8931db1f2_humidity"
    unique_id: zm1_b0f8931db1f2_humidity
    # friendly_name: 书房湿度
    state_topic: "device/zm1/b0f8931db1f2/sensor"
    unit_of_measurement: "%"
    icon: mdi:water-percent
    value_template: "{{ value_json.humidity }}"

    name: "zm1_b0f8931db1f2_pm25"
    unique_id: zm1_b0f8931db1f2_pm25
    # friendly_name: 书房PM25
    state_topic: "device/zm1/b0f8931db1f2/sensor"
    unit_of_measurement: "μg/m³"
    icon: mdi:blur
    value_template: "{{ value_json.PM25 }}"

    name: "zm1_b0f8931db1f2_hcho"
    unique_id: zm1_b0f8931db1f2_hcho
    # friendly_name: 书房甲醛
    state_topic: "device/zm1/b0f8931db1f2/sensor"
    unit_of_measurement: "mg/m³"
    icon: mdi:chemical-weapon
    value_template: "{{ value_json.formaldehyde }}"


在集成里面找到MQTT，里面只有最后一个，新版的写法变了吗？新版的该怎么写？

erj002

mqtt:
  sensor:
    ####################################################
    #                                                  #
    #                    PVE                           #
    #                                                  #
    ####################################################
    - name: "PVE_CPU_Temp0"
      state_topic: "pve/temp0"
      device_class: temperature
      #value_template: "{{ value_json.Intake_Temp }}"
      unit_of_measurement: "°C"

mr.chenwu

楼主解决了吗

zyling

前不久刚解决了同样的问题
https://bbs.hassbian.com/thread-18717-1-1.html