如何将Badge传感器移动到Card卡片

aaa

如

homeassistant:
  customize:
    sensor.latest_homeassistant:
      friendly_name: 最新版本
      homebridge_hidden: true
    sensor.cpu_temperature:
      friendly_name: 系统温度
      homebridge_hidden: true
      icon: mdi:temperature-celsius
    sensor.disk_use_:
      friendly_name: 已使用
      homebridge_hidden: true
    sensor.disk_free_:
      friendly_name: 剩余
      homebridge_hidden: true
    sensor.network_out_wlan0:
      friendly_name: 发送字节
      homebridge_hidden: true
    sensor.network_in_wlan0:
      friendly_name: 接收字节
      homebridge_hidden: true
    sensor.ipv4_address_wlan0:
      friendly_name: IP地址
      homebridge_hidden: true
    sensor.last_boot:
      friendly_name: 上次重启
      homebridge_hidden: true
    sensor.since_last_boot_templated:
      friendly_name: 已启动
      homebridge_hidden: true
    sensor.memory_use_percent: 
      friendly_name: RAM使用率
      homebridge_hidden: true
    sensor.cpu_speed:
      friendly_name: CPU频率
      homebridge_hidden: true
    sensor.processor_use:
      friendly_name: CPU使用频率
      homebridge_hidden: true
    sensor.uptime:
      friendly_name: 系统运行
      homebridge_hidden: true
sensor:
  - platform: systemmonitor
    resources:
    - type: memory_use_percent
    - type: processor_use
    - type: disk_use
      arg: /
    - type: disk_free
      arg: /
    - type: disk_use_percent
    - type: network_in
      arg: wlan0
    - type: network_out
      arg: wlan0
    - type: ipv4_address
      arg: wlan0
    - type: last_boot
      #arg: octave-cli
    - type: since_last_boot
    #  arg: octave-cli
#HomeAssistant运行时间
  - platform: uptime
    unit_of_measurement: hours
  - platform: command_line
    name: CPU Temperature
    command: "cat /sys/class/thermal/thermal_zone0/temp"
    # If errors occur, remove degree symbol below
    unit_of_measurement: "°C"
    value_template: '{{ value | multiply(0.001) | round(2)}}'
    #value_template: '{{ value | round(2) }}'
    scan_interval: 30
  - platform: command_line
    command: python3 -c "import requests; print(requests.get('https://pypi.python.org/pypi/homeassistant/json').json()['info']['version'])"
    name: latest_homeassistant
  - platform: template
    sensors:
      since_last_boot_templated:
        value_template: >-
          {% if states.sensor.since_last_boot.state.count("day") > 0 %}
          {{states.sensor.since_last_boot.state.split(",") [0] + 
          "," + 
          states.sensor.since_last_boot.state.split(",") [1].split(":") [0] + 
          " hours, " + 
          states.sensor.since_last_boot.state.split(",") [1].split(":") [1] +
          " minutes" }}
          {% else %}
          {{ "0 days, " + 
          states.sensor.since_last_boot.state.split(",") [0].split(":") [0] + 
          " hours, " + 
          states.sensor.since_last_boot.state.split(",") [0].split(":") [1] +
          " minutes" }}
          {% endif %}

group:
  system:
    name: 系统状态
    view: no 
    entities:
      - sensor.cpu_temperature
      - sensor.last_boot
      - sensor.since_last_boot_templated
      - sensor.uptime
      - senso.processor_use
      - sensor.memory_use_percent
      - sensor.disk_use_
      - sensor.disk_free_
      - sensor.disk_use_percent
      - sensor.network_in_wlan0
      - sensor.network_out_wlan0
      - sensor.ipv4_address_wlan0

复制代码

树莓派系统监视器 中的 CPU使用率 移动到下方卡片中，同时隐藏上方Badge里的同一个项目


感谢指导

villen

哦 先做个沙发然后在看

aktifin

加到group里，上面就消失了

潇洒哥er

要用customui。

aaa

aktifin 发表于 2018-5-14 15:30
加到group里，上面就消失了

group:
  system:
    name: 系统状态
    view: no 
    entities:
      - sensor.cpu_speed
      - sensor.cpu_temperature

复制代码

我尝试这样修改一下，但是没有效果

aaa

潇洒哥er 发表于 2018-5-14 15:46
要用customui。

应该不用这么复杂吧

aktifin

- senso.processor_use
这个写错了
- sensor.processor_use

aaa

aktifin 发表于 2018-5-14 19:29
- senso.processor_use
这个写错了
- sensor.processor_use

老师，眼神真的好使，解决了，感谢指导!