升级到23.12版本后读取树莓派CPU的温度不可用了

sircoco

有知道怎么改配置的大佬吗

lswq

config 结构换啦

command_line:
  - sensor:
      name: CPU Temperature
      command: "cat /sys/class/thermal/thermal_zone0/temp"
      # If errors occur, make sure configuration file is encoded as UTF-8
      unit_of_measurement: "°C"
      value_template: "{{ value | multiply(0.001) | round(1) }}"

复制代码

sircoco

lswq 发表于 2024-2-13 14:29
config 结构换啦

昨天才发现的，系统已经自带温度显现了，自行启用即可