ESP01S接433射频模块的问题

liuybhb

各位大佬，我用esp01s配合继电器控制一个灯带，使用esphome，现在增加随意贴控制的功能，但是433射频模不管是接GPIO2还是3，都接收不到信号，但是这个模块我接到D1开发板上就没问题，哪位大佬指导一下，谢谢。
esphome的yaml文件如下：

esphome:
  name: dengdai
  friendly_name: dengdai

esp8266:
  board: esp01_1m

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "+ykehwOQigMXijMeOAkO1C5DoTHmEyUJ5eNoXnKJ6qQ="

ota:
  password: "8888"

web_server:
  port: 80

wifi:
  ssid: "wifi"
  password: "88888888"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "dengdai"
    password: "88888888"

captive_portal:


binary_sensor:
  - platform: remote_receiver
    name: "rf_dengdai"
    rc_switch_raw:
      code: '110000000010110000101000'
      protocol: 1
    on_press:
      then:
        - switch.toggle: switch_dengdai
    filters:
      - delayed_off: 1000ms

switch:
  - platform: gpio
    pin: GPIO0
    name: "switch_dengdai"
    id: switch_dengdai

remote_receiver:
  pin:
    number: GPIO3
#    inverted: true
    mode:
      input: true
#      pullup: true
  dump:
    - rc_switch
  tolerance: 50%
  filter: 200us
  idle: 4ms
  buffer_size: 1kb

复制代码

gmshiwoge

老哥想问一下 怎么写可以把接收433发送到mqtt做自动化呢

liuybhb

gmshiwoge 发表于 2023-3-30 16:55
老哥想问一下 怎么写可以把接收433发送到mqtt做自动化呢

论坛有教程，你找一下，就是接收到433的对应信号之后切换传感器状态，根据传感器状态自动化