有关计量电表

vvlang

这种计量电表有人做成了吗？
用tuya-convert刷进去tasmota
或者线刷
esptool.py --port COM3 --baud 74880 --after no_reset write_flash --flash_size 1MB --flash_mode dio 0x00000 tuya_backup.bin --erase-all

- platform: mqtt
    name: "Mains Consumed Energy"
    state_topic: "tele/general-meter-switch/RESULT"
    value_template: >- 
      {% set message = value_json.SerialReceived %}
      {% set payload = message[6:14] %}
      {% set payload_len = (payload | length) %}
      {% set result = namespace(value='') %}
      
      {% for i in range(0, payload_len + 1) | reverse -%}
        {%- if i is divisibleby 2 -%}
          {%- set result.value = result.value + payload[i:i+2] -%}
        {%- endif -%}
      {%- endfor -%}
      
      {{ (result.value|float) / 100 }}
    unit_of_measurement: 'kWh'    
  - platform: mqtt
    name: "Mains Voltage"
    state_topic: "tele/general-meter-switch/RESULT"
    value_template: >- 
      {% set message = value_json.SerialReceived %}
      {% set payload = message[14:22] %}
      {% set payload_len = (payload | length) %}
      {% set result = namespace(value='') %}
      
      {% for i in range(0, payload_len + 1) | reverse -%}
        {%- if i is divisibleby 2 -%}
          {%- set result.value = result.value + payload[i:i+2] -%}
        {%- endif -%}
      {%- endfor -%}
      
      {{ (result.value|float) / 10 }}
    unit_of_measurement: 'Volts'
  - platform: mqtt
    name: "Mains Current"
    state_topic: "tele/general-meter-switch/RESULT"
    value_template: >- 
      {% set message = value_json.SerialReceived %}
      {% set payload = message[22:30] %}
      {% set payload_len = (payload | length) %}
      {% set result = namespace(value='') %}
      
      {% for i in range(0, payload_len + 1) | reverse -%}
        {%- if i is divisibleby 2 -%}
          {%- set result.value = result.value + payload[i:i+2] -%}
        {%- endif -%}
      {%- endfor -%}
      
      {{ (result.value|float) / 10000 }}
    unit_of_measurement: 'Amps'
  - platform: mqtt
    name: "Mains Frequency"
    state_topic: "tele/general-meter-switch/RESULT"
    value_template: >- 
      {% set message = value_json.SerialReceived %}
      {% set payload = message[30:38] %}
      {% set payload_len = (payload | length) %}
      {% set result = namespace(value='') %}
      
      {% for i in range(0, payload_len + 1) | reverse -%}
        {%- if i is divisibleby 2 -%}
          {%- set result.value = result.value + payload[i:i+2] -%}
        {%- endif -%}
      {%- endfor -%}
      
      {{ (result.value|float) / 100 }}
    unit_of_measurement: 'Hz'
  - platform: mqtt
    name: "Mains Active Power"
    state_topic: "tele/general-meter-switch/RESULT"
    value_template: >- 
      {% set message = value_json.SerialReceived %}
      {% set payload = message[38:46] %}
      {% set payload_len = (payload | length) %}
      {% set result = namespace(value='') %}
      
      {% for i in range(0, payload_len + 1) | reverse -%}
        {%- if i is divisibleby 2 -%}
          {%- set result.value = result.value + payload[i:i+2] -%}
        {%- endif -%}
      {%- endfor -%}
      
      {{ (result.value|float) / 100 }}
    unit_of_measurement: 'Watts'    
  - platform: mqtt
    name: "Mains Reactive Power"
    state_topic: "tele/general-meter-switch/RESULT"
    value_template: >- 
      {% set message = value_json.SerialReceived %}
      {% set payload = message[46:54] %}
      {% set payload_len = (payload | length) %}
      {% set result = namespace(value='') %}
      
      {% for i in range(0, payload_len + 1) | reverse -%}
        {%- if i is divisibleby 2 -%}
          {%- set result.value = result.value + payload[i:i+2] -%}
        {%- endif -%}
      {%- endfor -%}
      
      {{ (result.value|float) / 100 }}
    unit_of_measurement: 'Watts'      
  - platform: mqtt
    name: "Mains Apparent Power"
    state_topic: "tele/general-meter-switch/RESULT"
    value_template: >- 
      {% set message = value_json.SerialReceived %}
      {% set payload = message[54:62] %}
      {% set payload_len = (payload | length) %}
      {% set result = namespace(value='') %}
      
      {% for i in range(0, payload_len + 1) | reverse -%}
        {%- if i is divisibleby 2 -%}
          {%- set result.value = result.value + payload[i:i+2] -%}
        {%- endif -%}
      {%- endfor -%}
      
      {{ (result.value|float) / 100 }}
    unit_of_measurement: 'Watts'
  - platform: mqtt
    name: "Mains Power Factor"
    state_topic: "tele/general-meter-switch/RESULT"
    value_template: >- 
      {% set message = value_json.SerialReceived %}
      {% set payload = message[62:70] %}
      {% set payload_len = (payload | length) %}
      {% set result = namespace(value='') %}
      
      {% for i in range(0, payload_len + 1) | reverse -%}
        {%- if i is divisibleby 2 -%}
          {%- set result.value = result.value + payload[i:i+2] -%}
        {%- endif -%}
      {%- endfor -%}
      
      {{ (result.value|float) / 10 }}
    unit_of_measurement: '%'

复制代码

neroxps

没看懂，帖子没头没尾的~

vvlang

neroxps 发表于 2020-10-7 11:07
没看懂，帖子没头没尾的~

把电表ZMAi-90接入到homeassistant

neroxps

vvlang 发表于 2020-10-7 19:46
把电表ZMAi-90接入到homeassistant

哦 这个是接进去的配置是吧？

vvlang

neroxps 发表于 2020-10-8 09:02
哦 这个是接进去的配置是吧？

对的，在homeassistant里面的配置