小米智能开关pro 转无线开关怎么触发

miaowazz

用的xiaomi gateway3接入的开关，多模网关2也正常工作。在米家把开关配置成无线模式之后，action的事件还是触发不了，请问有大神了解吗

miaowazz

配置如下：

 {
    14469: ["Xiaomi", "Xiaomi Smart Wall Switch Pro (3 Gang)", "XMQBKG06LM", "xiaomi.switch.wpro3"],
    "spec": [
        BaseConv("channel_1", "switch", mi="2.p.1"),
        BaseConv("channel_2", "switch", mi="3.p.1"),
        BaseConv("channel_3", "switch", mi="4.p.1"),
        BaseConv("action", "sensor", entity=ENTITY_DISABLED),
        ConstConv("action", mi="5.e.1", value=BUTTON_1_SINGLE),
        ConstConv("action", mi="6.e.1", value=BUTTON_2_SINGLE),
        ConstConv("action", mi="7.e.1", value=BUTTON_3_SINGLE),
        MapConv("fault", "sensor", mi="2.p.3", map={0: "No Faults", 1: "Over Temperature", 2: "Overload", 3: "Overload And Overheat"}),
        MathConv("power", "sensor", mi="8.p.2", round=1),
        BaseConv("led", "switch", mi="9.p.1"),
    ],
}

复制代码