zigbee模块自制zigbee网关的问题

Dreamray

[quote]Roger 发表于 2019-1-14 18:08
首先，要让用户名homeassitant取得串口通讯的权限

sudo usermod -G dialout  ...[/quote]
感谢回复，代码中的“0451”“16a8”怎么来的，需要根据我的情况改吗
使用usb设备信息查看就可以看到，CC2531，vender_id（厂家id）就是0451，芯片id是16a8
[code]lsusb

复制代码

xtjatypm

Dreamray 发表于 2019-1-15 10:38
感谢回复，提供了很多方法。还想问下，zigbee2mqtt 从usb读取数据只能通过串口吗，读取的是不是存储到cc25 ...

不太现实，而且也没有人专门给开发软件，cc2531是51核的单片机，买的通用cc2531模块不具备网络模块硬件，基本只有usb串口， 弄的太复杂就不如用小米的网关了

如果你的虚拟机不能用usb或串口，就只能在win下用串口转tcp网络, 再在虚拟机下写个小程序把网络数据转到虚拟串口， 再用zigbee2mqtt

Roger

Dreamray 发表于 2019-1-15 10:38
感谢回复，提供了很多方法。还想问下，zigbee2mqtt 从usb读取数据只能通过串口吗，读取的是不是存储到cc25 ...

CC2531在zigbee2mqtt的应用中，只负责通讯，配置信息会自动生成别写在configuration.yaml文件中。这样的好处是，即使是cc2531坏掉了，换一个新的cc2531，插上，重启udev服务和docker，马上就可以正常使用了，不用再去配置。

arrive

Roger 发表于 2019-1-14 18:08
首先，要让用户名homeassitant取得串口通讯的权限[code]sudo usermod -G dialout  ...

太详细，感激涕零！

明白之前访问串口为何总是出错误。

thruway

怎么搜索设备

thruway

[Info] Configuration file found: /share/zigbee2mqtt/configuration.yaml
[Info] Configuration written to /share/zigbee2mqtt/configuration.yaml
2019-05-23T07:13:11: PM2 log: Launching in no daemon mode
2019-05-23T07:13:11: PM2 log: App [npm:0] starting in -fork mode-
2019-05-23T07:13:11: PM2 log: App [npm:0] online
> [email protected] start /zigbee2mqtt-1.4.0
> node index.js
  zigbee2mqtt:info 5/23/2019, 7:13:15 AM Logging to directory: '/share/zigbee2mqtt/log/2019-05-23.07-13-15'
[Info] Configuration file found: /share/zigbee2mqtt/configuration.yaml
[Info] Configuration written to /share/zigbee2mqtt/configuration.yaml
2019-05-23T07:13:22: PM2 log: Launching in no daemon mode
2019-05-23T07:13:23: PM2 log: App [npm:0] starting in -fork mode-
2019-05-23T07:13:23: PM2 log: App [npm:0] online
> [email protected] start /zigbee2mqtt-1.4.0
> node index.js
  zigbee2mqtt:info 5/23/2019, 7:13:26 AM Logging to directory: '/share/zigbee2mqtt/log/2019-05-23.07-13-26'
  zigbee2mqtt:info 5/23/2019, 7:13:28 AM Starting zigbee2mqtt version 1.4.0 (commit #unknown)
  zigbee2mqtt:info 5/23/2019, 7:13:28 AM Starting zigbee-shepherd
  zigbee2mqtt:info 5/23/2019, 7:13:30 AM zigbee-shepherd started
  zigbee2mqtt:info 5/23/2019, 7:13:30 AM Coordinator firmware version: '20190223'
  zigbee2mqtt:info 5/23/2019, 7:13:30 AM Currently 0 devices are joined:
  zigbee2mqtt:warn 5/23/2019, 7:13:30 AM `permit_join` set to  `true` in configuration.yaml.
  zigbee2mqtt:warn 5/23/2019, 7:13:30 AM Allowing new devices to join.
  zigbee2mqtt:warn 5/23/2019, 7:13:30 AM Set `permit_join` to `false` once you joined all devices.
  zigbee2mqtt:info 5/23/2019, 7:13:30 AM Zigbee: allowing new devices to join.
  zigbee2mqtt:info 5/23/2019, 7:13:30 AM Connecting to MQTT server at mqtt://192.168.2.152:1883
  zigbee2mqtt:info 5/23/2019, 7:13:30 AM zigbee-shepherd ready
  zigbee2mqtt:info 5/23/2019, 7:13:33 AM Connected to MQTT server
  zigbee2mqtt:info 5/23/2019, 7:13:33 AM MQTT publish: topic 'zigbee2mqtt/bridge/state', payload 'online'
  zigbee2mqtt:info 5/23/2019, 7:13:33 AM MQTT publish: topic 'zigbee2mqtt/bridge/config', payload '{"version":"1.4.0","commit":"unknown","coordinator":20190223,"log_level":"info","permit_join":true}'
  zigbee2mqtt:info 5/23/2019, 7:16:50 AM Succesfully reenabled joining
启动后是这样的算是成功启动了吗，但是在面板里找不到有知道的吗，帮忙看看

xuyang

还是小米网关简单的多啊