ESPHOME st7920 12864中文显示

qxdnzx

font:
  - file: "gfonts://Roboto"
    id: roboto
    size: 20
  - file: "fonts/simsunb.ttf"
    id: font2
    size: 28
    glyphs: 水位.:°0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz

time:
- platform: homeassistant
  id: my_time
  
sensor:
# 获取HA上面水位传感器
  - platform: homeassistant
    id: watertowerlevel
    entity_id: sensor.test1  # HA上面的实体ID
    internal: true 

# Example configuration entry
spi:
  clk_pin: GPIO14
  mosi_pin: GPIO15

display:
  - platform: st7920
    cs_pin:
      number: GPIO13
      inverted: true
    width: 128
    height: 64
    update_interval: 100ms 
    # ##起点 列X 行Y ，终点 列X 行Y 
    lambda: |-
      it.line(0, 0, 127, 0);
      it.line(0, 63, 127, 63);
      it.line(0, 0, 0, 63);
      it.line(127, 0, 127, 63);
      it.strftime(10,1,id(roboto),"%m.%d  %H:%M", id(my_time).now());
      it.printf(64, 25, id(font2), TextAlign::TOP_CENTER, "水位 : %.0f", id(watertowerlevel).state);

复制代码

想要显示中文字体很重要，英文字体会乱码，反复测试发现simsunb字体显示效果不错

sorrypqa

不错，很实用，谢谢分享！