|
|
MMC:
uboot env amlnf_env_read : ####
aml_nand_read_rsv_info:397,read nenv info to 310000
In: serial
Out: serial
Err: serial
[store]To run cmd[amlnf dtb_read 0x1000000 0x20000]
sub cmd dtb
new argv[1] dtb_read
do_dtb_ops(): argc 4
arg 0: amlnf
arg 1: dtb_read
arg 2: 0x1000000
arg 3: 0x20000
do_dtb_ops() read
amlnf_dtb_read: ####
aml_nand_read_rsv_info:397,read ndtb info to 500000
do_dtb_ops(): 131072 bytes read : OK
Amlogic multi-dtb tool
GZIP format, decompress...
Multi dtb detected
Multi dtb tool version: v2 .
Support 5 dtbs.
aml_dt soc: xiaomi platform: s12a variant: v01
dtb 0 soc: xiaomi plat: s12 vari: v1
dtb 1 soc: xiaomi plat: s12a vari: v01
dtb 2 soc: xiaomi plat: s12c vari: v01
dtb 3 soc: xiaomi plat: s12c vari: v02
dtb 4 soc: xiaomi plat: s12c vari: v03
Find match dtb: 1
amlkey_init() enter!
amlnf_key_read key data len too much
aml_nand_read_rsv_info:397,read nkey info to 400000
[EFUSE_MSG]keynum is 4
InUsbBurn
noSof
Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
HAVE SN Code ...
Saving Environment to aml-storage...
uboot env amlnf_env_save : ####
aml_nand_save_rsv_info:656, nenv: valid=1, pages=32
release_free_node 61: bitmap=1fffff
release_free_node 74: bitmap=1ffff7
aml_nand_save_rsv_info:716,save info to 320000
aml_nand_write_rsv:520,write info to 320000
[burnup]Rd:Up sz 0x3a6440 to align 0x1000
save_power_post ...
## Booting Android Image at 0x01080000 ...
reloc_addr =f0348e0
copy done
load dtb from 0x1000000 ......
Amlogic multi-dtb tool
Single dtb detected
Uncompressing Kernel Image ... OK
kernel loaded at 0x01080000, end = 0x017a7808
Loading Ramdisk to 0eead000, end 0f004ce0 ... OK
Loading Device Tree to 000000000eea2000, end 000000000eeac807 ... OK
Starting kernel ...
uboot time: 1825998 us
domain-0 init dvfs: 4
[ 0.273093@2] ff803000.serial: clock gate not found
get key is 0x00 , curr_boot is boot1
Booting from boot1
/dev/mtdblock5 is ready now.
[ 1.738093@3] i2c i2c-1: [aml_i2c_xfer] error ret = -5 (-EIO)
[ 1.738219@3] i2c i2c-1: token 1, master_no(1) 300K addr 0x3c
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Please press Enter to activate this console.
[ 5.824298@1] cyttsp 0-0008: Failed to request firmware touch.cyacd
[ 5.824931@1] cyttsp 0-0008: Failed to update firmware;
[ 7.761998@0] UBIFS error (ubi0:0 pid 949): ubifs_recover_leb: corrupt empty space LEB 1226:24576, corruption starts at 2048
[ 7.767563@0] UBIFS error (ubi0:0 pid 949): ubifs_scanned_corruption: corrupt ion at LEB 1226:26624
[ 7.776437@0] UBIFS error (ubi0:0 pid 949): ubifs_scanned_corruption: first 8 192 bytes from LEB 1226:26624
[ 7.788459@0] UBIFS error (ubi0:0 pid 949): ubifs_recover_leb: LEB 1226 scann ing failed
[ 8.447632@2] UBIFS error (ubi0:0 pid 962): ubifs_recover_leb: corrupt empty space LEB 1226:24576, corruption starts at 2048
[ 8.453200@2] UBIFS error (ubi0:0 pid 962): ubifs_scanned_corruption: corrupt ion at LEB 1226:26624
[ 8.462072@2] UBIFS error (ubi0:0 pid 962): ubifs_scanned_corruption: first 8 192 bytes from LEB 1226:26624
[ 8.474102@2] UBIFS error (ubi0:0 pid 962): ubifs_recover_leb: LEB 1226 scann ing failed
[ 8.486956@1] name: deviceid, size 15
[ 8.490343@0] name: didkey, size 38
[ 8.503107@2] name: mac_wifi, size 17
[ 8.506446@0] name: mac_bt, size 17
[ 8.877541@2] name: mac_wifi, size 17
到这就不动了。。ctrl+c无法终止 不会玩了 求讲解
|
|
发表于 2022-5-26 09:43:47