Sonoff-Tasmota pow数据读取

ruianyu

入坑没几天，想去读pow数据，翻看论坛都是那个1.0的能读取，还有就是DHT22这些又不一样，可我想用那个5.8
找他网站才发现方法
现在写下给说不定有我这样新入坑菜鸟
红色部分你自己起的名称。。。
sensor:
#功率
  - platform: mqtt
    name: "power"
    state_topic: "tele/sonoffpow/ENERGY"
    value_template: "{{ value_json.Power }}"
    unit_of_measurement: "W"
#电压
  - platform: mqtt
    name: "voltage"
    state_topic: "tele/sonoffpow/ENERGY"
    value_template: "{{ value_json.Voltage }}"
    unit_of_measurement: "V"
#今天耗电
  - platform: mqtt
    name: "today"
    state_topic: "tele/sonoffpow/ENERGY"
    value_template: "{{ value_json.Today }}"
    unit_of_measurement: "kWh"
#昨天耗电   
  - platform: mqtt
    name: "yesterday"
    state_topic: "tele/sonoffpow/ENERGY"
    value_template: "{{ value_json.Yesterday }}"
    unit_of_measurement: "kWh"
#总耗电   
  - platform: mqtt
    name: "total"
    state_topic: "tele/sonoffpow/ENERGY"
    value_template: "{{ value_json.Total }}"
    unit_of_measurement: "kWh"

囧

多多分享，没有坏事

airman

为什么我读不到数据
都是unknown 。

yuzheheart

mark

killadm

airman 发表于 2017-11-28 10:42
为什么我读不到数据
都是 unknown 。

版本 Sonoff-Tasmota 5.10.0d
我的sonoff pow控制台里边显示的是

把楼主的代码改成下边这样就能用了

sensor:
#功率
  - platform: mqtt
    name: "power"
    state_topic: "tele/sonoffpow/SENSOR"
    value_template: "{{value_json.ENERGY.Power}}"
    unit_of_measurement: "W"
#电压
  - platform: mqtt
    name: "voltage"
    state_topic: "tele/sonoffpow/SENSOR"
    value_template: "{{value_json.ENERGY.Voltage}}"
    unit_of_measurement: "V"
#今天耗电
  - platform: mqtt
    name: "today"
    state_topic: "tele/sonoffpow/SENSOR"
    value_template: "{{value_json.ENERGY.Today}}"
    unit_of_measurement: "kWh"
#昨天耗电   
  - platform: mqtt
    name: "yesterday"
    state_topic: "tele/sonoffpow/SENSOR"
    value_template: "{{value_json.ENERGY.Yesterday}}"
    unit_of_measurement: "kWh"
#总耗电   
  - platform: mqtt
    name: "total"
    state_topic: "tele/sonoffpow/SENSOR"
    value_template: "{{value_json.ENERGY.Total}}"
    unit_of_measurement: "kWh"

复制代码

原因找到了

From the release notes:
/* 5.10.0b

    Add support for PZEM004T energy sensor to be enabled with define USE_PZEM004T in user_config.h

    Change Sonoff Pow Energy MQTT data message and consolidate Status 8 into Status 10

QQ912801011

你好楼主！Sonoff-Tasmota  怎么设置啊？才能读到你的参数

Wen729

感谢分享

QQ912801011

大神们!这个要配什么模块啊?

superjsf

就以我所知，需要 Sonoff POW這個型號的硬件才會有這些個數據可讀取

mikegid

要POW专用模块才有数据读入