【求助】米家多功能网关连入的aqara墙壁开关没法在ha内控...

froggyfly

请教各位大佬，米家多功能网关（升级版）填入了ip和token，
下属挂载的aqara零火双键墙壁开关被ha自动发现如下图：



打开开关，边上的按钮会有即时反馈开关状态
但是在ha前端去点击开关按钮的时候，打开后会自动关闭，开关没有被触发，请问该如何解决？

froggyfly

找到问题了

Logger: xiaomi_gateway
Source: components/xiaomi_aqara/switch.py:127
First occurred: 上午11:40:40 (2 occurrences)
Last logged: 上午11:52:23

Gateway Key is not provided. Can not send commands to the gateway.

没有给网关密码，在设置中加入了下面的就解决了
xiaomi_aqara:
  discovery_retry: 5
  gateways:
    - key: xxxxxxxxxxxxxxxx

12512310

升级到112应该就会有没法用了，我升级以后所有子设备都没有了

mypal

12512310 发表于 2020-7-3 17:04
升级到112应该就会有没法用了，我升级以后所有子设备都没有了

Xiaomi Gateway (Aqara)

YAML configuration of the Xiaomi Aqara integration has been deprecated, please remove the xiaomi_aqara platform from your configuration.yaml file.

Xiaomi Aqara Gateways are discovered automatically and show up under “Configuration”-> “Integrations”, from there click on configure and go through the steps. If your Xiaomi Aqara Gateway does not show up automatically, go to “Configuration”-> “Integrations”-> press the “+” icon -> search for “xiaomi_aqara” and enter the setup. If no key is provided during setup, only the binary_sensor and sensor platforms will be available. A key is required to activate the other platforms.

112废弃了YAML的配置方式，只能通过设置里面的集成添加。还好关联的设备name没变化，加回来以后其他配置倒是都不用修改。

12512310

mypal 发表于 2020-7-3 21:11
Xiaomi Gateway (Aqara)

YAML configuration of the Xiaomi Aqara integration has been deprecated, pl ...

但是我用了集成添加，填写ip地址时都是不能识别，用any后填写key，key又无效，换回111版本后是正常使用。

lyfff

12512310 发表于 2020-7-4 14:38
但是我用了集成添加，填写ip地址时都是不能识别，用any后填写key，key又无效，换回111版本后是正常使用。 ...

升级114后此问题已解决