感谢分享
(homeassistant) admin@RT-AC3100-E7C2:/tmp/home/root# hass --open-ui
Config directory: /root/.homeassistant
2018-11-02 12:13:48 INFO (SyncWorker_3) Attempting install of PyQRCode==1.2.1
Traceback (most recent call last):
File "/opt/bin/hass", line 11, in <module>
sys.exit(main())
Exception in thread Thread-1:
Traceback (most recent call last):
File "/threading.py", line 917, in _bootstrap_inner
File "/threading.py", line 865, in run
File "/opt/lib/python3.7/site-packages/homeassistant/util/logging.py", line 85, in _process
self._queue.get(), self.loop).result()
File "/_base.py", line 430, in result
concurrent.futures._base.CancelledError
File "/opt/lib/python3.7/site-packages/homeassistant/__main__.py", line 389, in main
exit_code = asyncio_run(setup_and_run_hass(config_dir, args))
File "/runners.py", line 43, in run
File "/base_events.py", line 568, in run_until_complete
File "/opt/lib/python3.7/site-packages/homeassistant/__main__.py", line 283, in setup_and_run_hass
log_no_color=args.log_no_color)
File "/opt/lib/python3.7/site-packages/homeassistant/bootstrap.py", line 223, in async_from_config_file
config_dict, hass, enable_log=False, skip_pip=skip_pip)
File "/opt/lib/python3.7/site-packages/homeassistant/bootstrap.py", line 93, in async_from_config_dict
hass, core_config, has_api_password, has_trusted_networks)
File "/opt/lib/python3.7/site-packages/homeassistant/config.py", line 485, in async_process_ha_core_config
mfa_conf))
File "/opt/lib/python3.7/site-packages/homeassistant/auth/__init__.py", line 53, in auth_manager_from_config
for config in module_configs])
File "/opt/lib/python3.7/site-packages/homeassistant/auth/mfa_modules/__init__.py", line 132, in auth_mfa_module_from_config
module = await _load_mfa_module(hass, module_name)
File "/opt/lib/python3.7/site-packages/homeassistant/auth/mfa_modules/__init__.py", line 167, in _load_mfa_module
hass, module_path, module.REQUIREMENTS) # type: ignore
File "/opt/lib/python3.7/site-packages/homeassistant/requirements.py", line 43, in async_process_requirements
ret = await hass.async_add_executor_job(pip_install, req)
File "/thread.py", line 57, in run
File "/opt/lib/python3.7/site-packages/homeassistant/util/package.py", line 43, in install_package
process = Popen(args, stdin=PIPE, stdout=PIPE, stderr=PIPE, env=env)
File "/subprocess.py", line 756, in __init__
File "/subprocess.py", line 1430, in _execute_child
OSError: Cannot allocate memory
启动时候提示这个啥意思用U盘扩展分区怎么搞 貌似内存不够
鼠标手 发表于 2018-11-2 20:15
(homeassistant) admin@RT-AC3100-E7C2:/tmp/home/root# hass --open-ui
Config directory: /root/.homeass ...
你这个不是内存不够 你注意看你第一个错误前一行
2018-11-02 12:13:48 INFO (SyncWorker_3) Attempting install of PyQRCode==1.2.1
你要安装PyQRCode==1.2.1
本帖最后由 newspider0311 于 2018-11-3 03:50 编辑
Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken
by 'SSLError(SSLCertVerificationError(1, ' unknown error: certificate is
not yet valid (_ssl.c:1045)'))': /simple/setuptools/
/opt/lib/python3.7/site-packages/pip/_vendor/urllib3/connection.py:306: SystemTimeWarning: System time is
way off (before 2016-01-01). This will probably lead to SSL verification errors
SystemTimeWarning
Could not fetch URL https://pypi.org/simple/setuptools/: There was a problem confirming the ssl certifi
cate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/setuptools/
(Caused by SSLError(SSLCertVerificationError(1, ' unknown error: certific
ate is not yet valid (_ssl.c:1045)'))) - skipping
Could not find a version that satisfies the requirement setuptools (from versions: )
No matching distribution found for setuptools
##卡到这里 再也装不上了重启路由器后可以继续安装了真没想到还有时间过期这种问题。。。。
终于搞定了，感谢楼主分享教程。
本帖最后由 colock 于 2018-11-3 18:20 编辑
Command "/opt/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-5pmbg5if/cffi/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-4nhb1vib-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-5pmbg5if/cffi/
试试几次都是这个问题
上面的几个命令都试过了
arm-openwrt-linux-gnueabi-gcc -Wno-unused-result -Wsign-compare -DNDEBUG -O2 -pipe -march=armv7-a -mtune=cortex-a9 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=soft -O2 -pipe -march=armv7-a -mtune=cortex-a9 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=soft -DNDEBUG -fno-inline -O2 -pipe -march=armv7-a -mtune=cortex-a9 -fno-caller-saves -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result -mfloat-abi=soft -DNDEBUG -fno-inline -I/media/ware4/Entware-ng.2017.12/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/opt/include -I/media/ware4/Entware-ng.2017.12/staging_dir/target-arm_cortex-a9_glibc-2.23_eabi/include -I/media/ware4/Entware-ng.2017.12/staging_dir/toolchain-arm_cortex-a9_gcc-6.3.0_glibc-2.23_eabi/usr/include -I/media/ware4/Entware-ng.2017.12/staging_dir/toolchain-arm_cortex-a9_gcc-6.3.0_glibc-2.23_eabi/include -fPIC -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/ffi -I/usr/include/libffi -I/opt/include/python3.6 -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.6/c/_cffi_backend.o
c/_cffi_backend.c:15:17: fatal error: ffi.h: No such file or directory
#include <ffi.h>
^
compilation terminated.
error: command 'arm-openwrt-linux-gnueabi-gcc' failed with exit status 1
----------------------------------------
Command "/opt/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-bny6nzu5/cffi/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-uvhco4ik-record/install-record.txt --single-version-externally-managed --compile" failed with error code 1 in /tmp/pip-build-bny6nzu5/cffi/
yeslight 发表于 2018-10-25 10:38
卡在这一步，python3-cffi，python3-pyopenssl，libffi 这些都装了，折腾一天了都不行，求助
...
你解决没我也一样的问题
能不能详细描述一下第9步？具体的命令
我说下我的安装步骤第三步需要进入usb相关应用-Download Master下面的install选择你的u盘安装然后用软件中心的SSH输入用户名和密码后在命令行直接输入entware-setup.sh安装entware 接下来按照楼主第4 5 6 安装完后 参考楼主的pip3 list（输入pip3 list）少几个就装几个 类似这样pip3 install mutagen pycryptodome pyOpenSSL pyotp PyQRCode python-jose-cryptodome ua-parser user-agents warrant xmlto dict安装完毕再输入hass --open-ui 启动时候巨慢 差不多需要10分钟 当看到KeyError: 'name' 时候 输入你路由器管理ip:8123 就可以了
newspider0311 发表于 2018-11-4 04:17
能不能详细描述一下第9步？具体的命令
第九步需要用到WinSCP 百度下