【学习记录】ESPHOME 点亮 NODEMCU 的2个板灯 还有D5接了个DHT
本帖最后由 franklin87 于 2021-4-21 20:17 编辑esphome:
name: diy-nodemcu-temp
platform: ESP8266
board: nodemcuv2
wifi:
ssid: "wifi账号"
password: "密码"
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Diy-Nodemcu-Temp"
password: "密码"
captive_portal:
# Enable logging
logger:
# Enable Home Assistant API
api:
ota:
time:
- platform: homeassistant
id: time2
switch:
- platform: restart
name: "Reboot the light"
id: light_home_restart
#控制2路灯
output:
- platform: gpio
pin: GPIO2
id: relay
- platform: gpio
pin: GPIO16
id: relay2
light:
- platform: binary
name: "light_home"
id: light_home
output: relay
- platform: binary
name: "light_home_2"
id: light_home2
output: relay2
#暂时没用，还没物理面板
binary_sensor:
- platform: gpio
pin:
number: GPIO13
mode: INPUT_PULLUP
inverted: True
name: "light_home Physical Switch Sensor"
on_press:
then:
- light.turn_on: light_home
on_release:
then:
- light.turn_off: light_home
on_multi_click:
- timing:
- ON for at most 0.5s
- OFF for at most 0.5s
- ON for at most 0.5s
- OFF for at most 0.5s
- ON for at most 0.5s
- OFF for at most 0.5s
- ON for at most 0.5s
- OFF for at least 0.2s
then:
- switch.turn_on: light_home_restart
#开启网页端
web_server:
port: 80
sensor:
- platform: dht
pin: D5
temperature:
name: temperature
id: temp
humidity:
name: humidity
id: humi
model: DHT11
update_interval: 10s
不错，学习一下，谢谢分享！
页:
[1]